ENERGY Solar Cables
2 Contents TECSUN(PV) PV1-F Cables for Photovoltaics ___________________ 3 Technical Data __________________________________ 4 Design Features ________________________________ 6 Selection and Ordering Data _____________________ 6 TECSUN DUO (PV) Cables for Photovoltaics ____________________ 7 Technical Data __________________________________ 8 Design Features _______________________________ 10 Selection and Ordering Data ____________________ 10 TECPLUG PV Connectors ___________________ 11 Technical Data __________________________________ 12 Design Features _______________________________ 14 Selection and Ordering Data ____________________ 14
3 TECSUN (PV) PV1-F Cables for Photovoltaics
4 Technical Data Manufacturer: Prysmian Kabel und Systeme GmbHKabelwerk Neustadt bei Coburg / Germany Trademark: TECSUN (PV) Type designation: PV1-F Approvals: Requirements for cables for PV systems, DKE/VDE AK 411.2.3VDE-Reg.No. 7985TÜV 2 PfG 1169/08.2007Cert.-No. R 60013989 Application: PRYSMIAN TECSUN(PV)PV1-F PV-Wire is intended for use in Photovoltaic PowerSupply Systems: Indoor and/or outdoor, in industrial and agriculture fields.They are suitable for applications in/at equipment with protective insulation(Protecting Class II), in explosion hazard areas (PRYSMIAN Internal Testing)and may be installed as well as fixed or freely suspended or free movable.Installation in cable trays, conduits, on and in walls is available. PRYSMIAN Internal Testing: TECSUN(PV) PV1-F PV-Wire is permitted for direct burial. ELECTRICAL PARAMETERS Rated Voltage: (Uo/U) 600/1000V AC Maximum PV-System voltage: DC up to 2000V possible Maximum permissibleoperating voltage in ACsystems: 700/1200V Maximum permissibleoperating voltage in DCsystems: 900/1800V Test voltage: 6500V AC / 15000V / 5 min. Ampacity: Meets requirements for PV-Wire per TÜV 2 PfG 1169/08.2007 Tests-TÜV 2PfG 1169/08.2007: Meets VDE 0282 Section 2, HD 22.2 and EN 50395 Conductor Resistance, Test Voltages AC and DC, Electric Strength, Surface Resistance, Spark Test onInsulation, EN 50305 Part 6 DC stability (10 days, 85°C, salt water, 1500V DC),Insulation Resistance at 20°C and 90°C in Water. PRYSMIAN Internal Testing: Insulation Resistance at 120°C in Air.
5 TECSUN (PV) PV1-F Cables for Photovoltaics Technical Data ChEMICAL PARAMETERS Mineral Oil Resistance: Meets VDE 0473-811-2-1, DIN EN 60811-2-1 24h, 100°C Acid and Alkaline Resistance: Meets TÜV 2 PfG 1169/08.2007 7 days, 23°C(N-Oxalic Acid, N-Sodium Hydroxide) per EN 60811-2-1 Ammonia Resistance: 30 days in Saturated Ammonia Atmosphere (PRYSMIAN Internal Testing) Weather resistance- TÜV 2PfG 1169/08.2007: Ozone resistance per DIN EN 50396 Test Type B, HD 22.2 Test Type BUV-Resistance per UL 1581 (Xeno-Test), ISO 4892-2 (Method A) andHD506/A1-2.4.20 - PRYSMIAN Internal Testing: Absorption of Water (Gravimetric) per DIN EN 60811-1-3 Fire Behaviour- TÜV 2 PfG 1169/08.2007: Flame propagation:Single Cable Flame Test per IEC 60332-1-2, DIN EN 60332-1-2Halogen-free per IEC 60754-1No Corrosivity per IEC 60754-2 - PRYSMIAN Internal Testing: Multiple Cable Flame Test per DIN EN 50305-9Low Smoke Emission per IEC 61034, EN 61034 (Light Transmittance 70%)Low Toxicity per DIN EN 50305, ITC 3 Environmentally Friendly: TECSUN (PV) PV-Wire complies with RoHS directives 2002/95/EG, 2005/69/EGand 2006/122/EG of the European Union DIRECT BURIAL Installation Instruction: Installation Conditions per VDE 0800 Section 174 § 5.4.2 andVDE 0891 Section 6 § 4.2 ratings MEChANICAL PARAMETERS Tensile Rating: 15 N/mm² in operation, 50 N/mm² during installation per HD 516DIN VDE 0298 Section 3 § 7.1 and Section 300 § 5.4.1 Minimum bending Radius: min. 4 x D (D=Overall Cable Diameter) Abrasion-PRYSMIAN Internal Testing: Meets DIN EN 53516: against abrasive paper,Sheath against sheath,Sheath against metal,Sheath against plastics Shrinkage Test: Meets TÜV 2PfG 1169/08.2007 2% per EN 60811-1-3 Pressure Test at highTemperature: Meets TÜV 2PfG 1169/08.2007 50% per EN 60811-3-1 Dynamic Penetration Test: Meets requirements for PV-Wire per TÜV 2 PfG 1169/08.2007 Shore-hardness A: 85 per DIN EN 53505 (PRYSMIAN Internal Testing) Gnawer resistance: Safety can be optimized by utilizing protective hoses and cables with spinningor braid metallic coatings ThERMAL PARAMETERS Ambient Temperature: From -40°C up to +90°C (-40°F up to +194°F)for fixed and flexible installation Maximum PermissibleConductor OperatingTemperature: +120°C (+248°F) per IEC 60216 permanent temperature 120°C for 20.000 h(= 2.3 years), at max. 90°C permanent temperature (= 30 years) Short-circuit temperature-TÜV 2 PfG 1169/08.2007:-PRYSMIAN Internal Testing: +200°C (392°F) at the conductor max. 5 sec.+250°C (482°F) at the conductor max. 5 sec. Resistance to cold: Cold Bend Test at -40°C temperature per DIN EN 60811-1-4Impact Test -40°C temperature similar to DIN EN 50305 Damp-heat Test: Meets TÜV 2 PfG 1169/08.20071.000h at 90°C and 85% humidity and per EN 60068-2-78
6 TECSUN (PV) PV1-F Cables for Photovoltaics TECSUN (PV) PV1-F TECSUN (PV) PV1-F TECSUN (PV) PV1-F Design Features Selection and Ordering Data Type designation: TECSUN (PV) PV1-F Conductor: Electrolytic tinned copper, Class 5 in accordance with IEC 60228 (VDE 0295) Insulation: HEPR 120°C similar to IEC 60502-1 (compound type EI6 / EI8) Core identification: Natural colour - White Sheath: Cross-linked EVA rubber 120 °C based on DIN EN 50563-2-1 (compound type EM4 / EM8)Insulation and sheath are connected solidly (Two-layer-insulation ) Sheath-colours: black, blue, red Marking: (rhombus) PRYSMIAN TECSUN (PV) PV1-F (cross-section) 0.6/1 KV (VDE-REG. / TÜV) Nominal cross-section and colour Order No. Conductor diameter [mm] Overall diameter of cable Min. value[mm] Overall diameter of cable Max. value[mm] Approx. net weight [kg/km] Minimum bending radius [mm] Maximum permissible tensile load [N] Current carrying capacity at 60°C ambient temperature (free in air) [A] Permissible short circuit current (1s) [kA] 1,5mm² black 5DH93011 1,6 4,4 4,8 29 14,4 23 29 0,19 1,5mm² blue 5DH93012 1,6 4,4 4,8 29 14,4 23 29 0,19 1,5mm² red 5DH93013 1,6 4,4 4,8 29 14,4 23 29 0,19 2,5mm² black 5DH93012 1,9 4,7 5,1 43 15,3 38 41 0,32 2,5mm² blue 5DH93022 1,9 4,7 5,1 43 15,3 38 41 0,32 2,5mm² red 5DH93023 1,9 4,7 5,1 43 15,3 38 41 0,32 4,0mm² black 5DH93031 2,4 5,2 5,6 58 16,8 60 55 0,50 4,0mm² blue 5DH93032 2,4 5,2 5,6 58 16,8 60 55 0,50 4,0mm² red 5DH93033 2,4 5,2 5,6 58 16,8 60 55 0,50 6,0mm² black 5DH93041 2,9 5,7 6,1 76 18,3 90 70 0,76 6,0mm² blue 5DH93042 2,9 5,7 6,1 76 18,3 90 70 0,76 6,0mm² red 5DH93043 2,9 5,7 6,1 76 18,3 90 70 0,76 10mm² black 5DH93051 4,0 6,8 7,2 120 21,6 150 98 1,26 16mm² black 5DH93061 5,5 8,3 9,0 178 36 240 132 2,01 25mm² black 5DH93071 6,4 10,0 10,7 273 43 375 176 3,15 35mm² black 5DH93081 7,5 11,1 11,8 364 47 525 218 4,41 50mm² black 5DH93091 9,0 12,6 13,3 500 53 750 276 6,30 70mm² black 5DH93101 10,8 14,4 15,2 686 61 1.050 347 8,82 95mm² black 5DH93111 12,6 16,2 17,0 899 68 1.425 416 12,0 120mm² black 5DH93121 14,3 17,7 18,7 1.131 75 1.800 488 15,1 150mm² black 5DH93131 15,9 19,7 20,7 1.382 83 2.250 566 18,9 185mm² black 5DH93141 17,5 21,3 22,3 1.669 89 2.775 644 23,3 240mm² black 5DH93151 20,5 24,2 25,5 2.208 102 3.600 775 30,4 Technical data, dimension and weights are subject to change. PRYSMIAN Germany Version: 1.4 - Date: 2012-02-08
7 TECSUN DUO (PV) Cables for Photovoltaics
8 Technical Data Manufacturer: Prysmian Kabel und Systeme GmbHKabelwerk Neustadt bei Coburg / DE Trademark: TECSUN DUO (PV) PV1-F Type designation: PV1-F Approvals: Requirements for cables for PV systems, DKE/VDE AK 411.2.3VDE-Reg. No. 7985TÜV 2 PfG 1169/08.2007Cert.No. R 60013989 Application: PRYSMIAN Solar cables TECSUN DUO (PV) are intented for use in photovoltaicpower supply systems and similar applications as free movable, free hanging,fixed installation and buried in ground in constructional secured systems. Thecables can be used indoor, outdoor, in explosion hazard areas, in industry andagriculture. They are suitable for applications in/at equipment with protectiveinsulation (protecting class II). In other respects IEC 61215 and 61646, IEC60364-7-712:2002 and DIN VDE 0100 part 520 applies. ELECTRICAL PARAMETERS Rated Voltage: AC 0.6/1.0 kV Maximum PV-System voltage: DC up to 2.0 kV possible Maximum permissibleoperating voltage in ACsystems: 0.7/1.2 kV Maximum permissibleoperating voltage in DCsystems: 0.9/1.8 kV Test voltage: AC 6 kV / DC 10 kV (15 min.) Ampacity: According to Requirements for cables for PV systems, DKE/VDE AK 411.2.3 Tests According to HD 22.2 - conductor resistance, test voltages AC and DC, electricstrength, surface resistance, spark test on insulation, insulation resistance at20°C and 90°C in water and at 120°C in air.EN 50305 Part 6 - DC-stability (10 days, 85°C, salt water, 1.5 kV DC)
9 TECSUN DUO (PV) Cables for Photovoltaics Technical Data ChEMICAL PARAMETERS Mineral oil resistance: 24h, 100°C according to DIN VDE 0473-811-2-1, DIN EN 60811-2-1 Acid and alkaline resistance: According to EN 60811-2-17 days, 23°C (N-Oxalic acid, N-Sodium hydroxide) Ammonia resistance: 30 days in saturated ammonia atmosphere (internal testing) Weather resistance: Ozone resistance according to DIN EN 50396 test type B, HD 22.2 test type BUV-resistance according to UL 1581 (Xeno-Test), ISO 4892-2 (Method A) andHD506/A1-2.4.20Absorption of water (gravimetric) according to DIN VDE 0473-811-1-3, DIN EN60811-1-3 Behaviour in case of fire: Flame propagationSingle cable according to DIN VDE 0482 Part 332-1-2, DIN EN 60332-1-2Multiple cable according to DIN VDE 0482 Part 266-2-5, DIN EN 50305-9Low smoke emission according to DIN VDE 0482 Part 268-2, DIN EN 50268-2(light transmittance 70%)Corrosivity according to DIN EN 50267-2-2Toxicity according to DIN EN 50305, ITC-index 3 Ecological innocuousness: TECSUN DUO (PV) cables are in accordance with the codes 2000/53/EG,2002/96/EG, 2003/11/EG and exempt from metallic lead-, mercury-, hexavalentchromium- und bromine containing compounds. RoHS conform. MEChANICAL PARAMETERS Tensile load: 15 N/mm² in operation, 50 N/mm² during installation Minimum bending radii: see selection and ordering data Abrasion: According to DIN EN 53516: against abrasive paperSheath against sheath (internal testing)Sheath against metal (internal testing)Sheath against plastics (internal testing) Shrinkage test: According to EN 60811-1-3 Pressure test at hightemperature: According to EN 60811-3-1 Dynamic penetration test: According to Requirements for cables for PV systems, DKE/VDE 411.2.3 Shore-hardness: 85 according to DIN EN 53505 Gnawer resistance: An optimum safety can be reached with protective hoses and by use of specialcable types with metallic coating such as spinning or braid. ThERMAL PARAMETERS Maximum permissibleambient temperature: +90°C (stationary and in motion) Minimum permissibletemperature: -40°C (stationary and in motion) Maximum permissibleoperating temperature of theconductor: +120°C; Interpretation according to IEC 60216: permanent temperature 120°Cfor 20.000 h (= 2.3 years), at max. 90°C permanent temperature (= 30 years) Short-circuit temperature: +250°C (at the conductor max. 5 sec.) Resistance to cold: Bending test at low temperature according to DIN EN 60811-1-4Impact test similar to DIN EN 50305 Damp-heat Test: According to EN 60068-2-781.000h at 90°C and 85% humidity
10 TECSUN DUO (PV) Cables for Photovoltaics Design Features Selection and Ordering Data Type designation: TECSUN DUO (PV) PV1-F Conductor: Electrolytic copper, tinned, Class 5 according to IEC 60228 (DIN VDE 0295) Insulation: HEPR 120°C similar to IEC 60502-1 (compound type EI6 / EI8) Core identification: + pole red, - pole black Sheath: EVA 120 °C based on DIN VDE 0282 part 1, HD 22.1 (compound type EM4 / EM8)Insulation and sheath are connected solidly (Two-layer-insulation ) Sheath-colours: black Marking: (rhombus) PRYSMIAN TECSUN (PV) PV1-F (cross-section) 0.6/1 KV (VDE- REG./TÜV) Nominal cross-section and colour Order No. Conductor diameter [mm] Overall diameter of single cable Min. value[mm] Overall diameter of single cable Max. value[mm] Approx. net weight Twin Cable [kg/km] Minimum bending radius [mm] Maximum permissible tensile load [N] Current carrying capacity at 60°C ambient temperature (free in air) [A] Permissible short circuit current (1s) [kA] 2x 4 black - 2.4 5.2 each 5.6 each 116 16.8 60 44 0.50 2x 6 black - 2.9 5.7 each 6.1 each 152 18.3 90 56 0.76 2x10 black - 4.0 6.8 each 7.2 each 240 21.6 150 78 1.26 TECSUN DUO (PV) Technical data, dimension and weights are subject to change. PRYSMIAN Germany Version: 1.0 - Date: 2010-11-30
11 TECPLUG PV Connectors
12 Technical Data Manufacturer: PRYSMIAN Kabel und Systeme GmbHCable plant Neustadt near Coburg / DEin Cooperation with Wieland Electric GmbH, Bamberg Trademark: TECPLUG Type designation: PST40I1 Approvals: DIN V VDE V 01263TÜV Certificate No. R 60018371IEC 617301 Application: PRYSMIAN Solar connectors TECPLUG are intented for the use in photovoltaicpower supply systems at tensions up to 1.000V DC and currents up to 40A percontact according to application class A.Outdoor and indoor usage as fixed or free installation is permitted. They aresuitable for applications in/at equipment with protective insulation (protectingclass II). ELECTRICAL PARAMETERS Rated Voltage: 1.000 V Overvoltage category: 3 Protection class: II Test voltage: 6 kV AC (1 min.) Ampacity: According to IEC 60512 Rated current (85°C) forcross sectional areas- 1,5 mm²:- 2,5 mm²:- 4,0 mm²:- 6,0 mm²:- 10 mm²: 17,5 A24 A32 A40 A40 A Contact resistance accordingto EN 60352-9: 1mOhm Protection against accidentalcontact: Test according to IEC 60512, Test load 10N Clearance: 14mm according to IEC 606641 Creepage distance: 28mm according to IEC 606641 Impulse withstand voltage: 8 kV according to IEC 606641
13 TECPLUG PV Connectors Technical Data ChEMICAL PARAMETERS Resistant against: Oil and Grease, Alcohol, Ammonia, Acids and Alkalines, Seawater. Other resistances on request. UV- and weather resistance: According to ISO 49822, Method A Corrosion protection: According to ISO 6988 Behaviour in case of fire- Insulation material of body: - Insulation material carrying electrical contacts: - Combustion category: Test according to IEC 60695-11-20Glow wire test according to IEC 61695-2-10,650°C Test according to IEC 60695-11-10Glow wire test according to IEC 61695-2-10,650°CV2 according to IEC 60695-11-10 MEChANICAL PARAMETERS Crimp connection, withdrawal strength: According to IEC 60352-2 Stress compensation fortensile load: According to IEC 60512 17c Stress compensation fortorsional load: According to IEC 60512 17d Drop test: According to IEC 60512 7b Insertion/withdrawal cycles: 100 operations without load Bending test: According to DIN V VDE V 01263, similar to IEC603091 Strain relief: According to IEC 60512-9 Pull off force: 80 N, according to IEC 60512 15f Degree of protection: IP 20 (unplugged)IP 68 (plugged) Tightening torque: 3 - 3,5 Nm for cable glands to ensure strain relief and tightness ThERMAL PARAMETERS Max. permissible operatingtemperature: 110°C Resistance to cold: -40°C, Impact resistance test at low temperature according to DIN V VDE V 01263 (IEC 60068275) Alternating temperature test: -40°C to +85°C according to IEC 60068214, Test Nb Damp heat test: 85°C, 85% rel. humidity for 1000h according to IEC 61215 10.13
14 TECPLUG PV Connectors Design Features Selection and Ordering Data Specification: Unipolar connector IP 68 Body: Polyamide (PA66) Sealing: NBR (Nitrile-Butadien-Rubber) ContactMale contact: Female: - solid (screw machined) male contactsilverplated brass- solid (screw machined) female contactsilverplated brass Marking: PST40I1 Ampacity/Cross sectional area +(Female) or -(Male) Nominal cross section: 1,5mm² to 10mm² Trademark: TECPLUG Description Nominal cross-section Length of cable 1. End 2. End (others on request) No of items per unit Order No. TECPLUG, pre-assembled connectors Pre-assembled cord 1 x 1,5 mm² 100 cm Male free 100 pieces 5DX8 1 S 01 100 0 Pre-assembled cord 1 x 1,5 mm² 100 cm Female free 100 pieces 5DX8 2 S 01 100 0 Pre-assembled cord 1 x 2,5 mm² 100 cm Male free 100 pieces 5DX8 1 S 02 100 0 Pre-assembled cord 1 x 2,5 mm² 100 cm Female free 100 pieces 5DX8 2 S 02 100 0 Pre-assembled cord 1 x 4,0 mm² 100 cm Male free 100 pieces 5DX8 1 S 04 100 0 Pre-assembled cord 1 x 4,0 mm² 100 cm Female free 100 pieces 5DX8 2 S 04 100 0 Pre-assembled cord 1 x 6,0 mm² 100 cm Male free 100 pieces 5DX8 1 S 06 100 0 Pre-assembled cord 1 x 6,0 mm² 100 cm Female free 100 pieces 5DX8 2 S 06 100 0 Pre-assembled cord 1 x 10 mm² 100 cm Male free 100 pieces 5DX8 1 S 10 100 0 Pre-assembled cord 1 x 10 mm² 100 cm Female free 100 pieces 5DX8 2 S 10 100 0 Pre-assembled cord 1 x 1,5 mm² 200 cm Male Female 100 pieces 5DX8 1 S 01 020 4 Pre-assembled cord 1 x 2,5 mm² 200 cm Male Female 100 pieces 5DX8 1 S 02 020 4 Pre-assembled cord 1 x 4,0 mm² 200 cm Male Female 100 pieces 5DX8 1 S 04 020 4 Pre-assembled cord 1 x 6,0 mm² 200 cm Male Female 100 pieces 5DX8 1 S 06 020 4 Pre-assembled cord 1 x 10 mm² 200 cm Male Female 100 pieces 5DX8 1 S 10 020 4
15 Selection and Ordering Data Description Nominal cross-section Length of cable 1. End 2. End (others on request) No of items per unit Order No. TECPLUG, for assembling Male connector 1,5 mm² - - - 100 pieces 5DX8 200 015 00 Female connector 1,5 mm² - - - 100 pieces 5DX8 100 015 00 Male connector 2,5 mm² - - - 100 pieces 5DX8 100 025 00 Female connector 2,5 mm² - - - 100 pieces 5DX8 200 025 00 Male connector 4,0 mm² - - - 100 pieces 5DX8 100 040 00 Female connector 4,0 mm² - - - 100 pieces 5DX8 200 040 00 Male connector 6,0 mm² - - - 100 pieces 5DX8 100 060 00 Female connector 6,0 mm² - - - 100 pieces 5DX8 200 060 00 Male connector 10 mm² - - - 100 pieces 5DX8 100 100 00 Female connector 10 mm² - - - 100 pieces 5DX8 200 100 00 Description Nominal cross-section Length of cable 1. End 2. End (others on request) No of items per unit Order No. TECPLUG, bulkhead connectors Male connector 1,5 mm² - - - 100 pieces 5DX8 100 015 GA Female connector 1,5 mm² - - - 100 pieces 5DX8 200 015 GA Male connector 2,5 mm² - - - 100 pieces 5DX8 100 025 GA Female connector 2,5 mm² - - - 100 pieces 5DX8 200 025 GA Male connector 4,0 mm² - - - 100 pieces 5DX8 100 040 GA Female connector 4,0 mm² - - - 100 pieces 5DX8 200 040 GA Male connector 6,0 mm² - - - 100 pieces 5DX8 100 060 GA Female connector 6,0 mm² - - - 100 pieces 5DX8 200 060 GA Male connector 10 mm² - - - 100 pieces 5DX8 100 100 GA Female connector 10 mm² - - - 100 pieces 5DX8 200 100 GA Description Nominal cross-section Length of cable 1. End 2. End (others on request) No of items per unit Order No. Accessories Tool kit complete - - - 1 piece 5DX8 000 000 WK Tool kit basic - - - 1 piece 5DX8 000 001 WK System kit - - - 1 piece 5DX8 000 000 SK TECPLUG PV Connectors Technical data, dimension and weights are subject to change. Version: 1.3 Date: 20090209
Prysmian Cables & Systems Australia Phone: 1300 300 304 Fax: 1300 300 307 1 Heathcote Road, Liverpool 2170 NSW, Australia www.prysmian.com.au Version 2, No vember , 2012
